Can this ring be resized?

Limited enlargement may be possible. GETi says grade 5 titanium cannot be stretched or compressed: machining the inside larger removes metal and cannot reduce the size. Wall thickness, stones and inlays limit that option. Grade 2 titanium has different possibilities, so check the actual grade and design. A remake may be offered instead; confirm what happens to the original ring, engraving and finish before agreeing.

Is engraving included?

Yes, and it is optional. Leave the box blank and the ring is made plain. If you do want one it is laser cut inside the band where the ring is made, rather than sent out to a third party, and there is no charge and no extra wait.

How long will it take?

2 to 3 weeks. It is made in your size after you order, not picked off a shelf, and that is the reason the widths and finishes are open choices.

Can I return it if I have it engraved?

Not for a change of mind. An engraving makes the ring clearly personalised, which puts it outside the statutory right to cancel, and it cannot be resold. Every ring shop draws the line here. Order it plain and you keep the full 30 days. Either way, a ring that arrives faulty or is not what you ordered is covered by the Consumer Rights Act, which nothing waives.

How much does the Trinity knots, gold inlay ring weigh?

About 1.5g at 4mm, 2.2g at 6mm, 3.6g at 10mm, estimated for a plain band in titanium at UK size N. Larger sizes and wider bands weigh more. It is a light ring by any standard: 18ct gold of the same size is more than twice the weight.

What widths does it come in, and do they cost the same?

4 to 10mm. 4mm, 5mm, 6mm, 7mm are £675, and 8mm, 9mm, 10mm £700, because the wider bands take more metal to make.

What is closest to the Trinity knots, gold inlay in the range?

Gold line, three diamonds (titanium with gold inlay) and Hammered black, gold line (black zirconium with gold inlay). The comparison table on this page sets them side by side on metal, width, hardness and price.

What if I get the size wrong?

If it is unengraved, return it inside 30 days and we refund it, and we pay the postage. Use the free ring size finder first if you are unsure, and if the ring is a surprise, ask us and we will talk you through the ways to find out without asking them.

Multi toned · Titanium with solid gold inlay

Trinity knots, gold inlay

From £675

Trinity knots cut through a solid gold inlay.

A strip of solid 9ct gold set flush into titanium, then laser cut with a run of trinity knots so the pattern is the metal beneath showing through the gold. Two golds in the rose and yellow version, or white gold alone. Hallmarked at Birmingham.

Made to order · 2 to 3 weeks · posted insured

Before you order, in one place

What you are buying: Trinity knots, gold inlay, precious inlay, made to order in your size. Widths 4 to 10mm.
Price: £675 total. UK delivery and engraving are included and nothing is added at checkout.
When it arrives: 2 to 3 weeks to make, then one working day insured and signed for. Delivery in full
Changing your mind: 30 days from delivery, return postage paid, unless you have it engraved. The cancellation right
Who you are contracting with: Trothe Ltd, registered in England and Wales, company number 17431230, Lytchett House, 13 Freeland Park, Wareham Road, Poole, Dorset, BH16 6FA. Questions and complaints to hello@trothe.co.uk.

MaterialTitanium with solid gold inlay
InlaySolid 9ct gold, flush set
Surface wearGrade and finish dependent; not scratch proof
Density4.5 g/cm³ base metal
ResizableDepends on base
HallmarkedYes, Birmingham Assay Office
MadeTo order, in your size
Delivery2 to 3 weeks, insured
Returns30 days, unengraved
EngravingOptional, included, inside the band

Also in: Wedding rings, His and hers, Men's rings, Women's rings

About this ring

Trinity knots, gold inlay, in detail

A strip of solid 9ct gold runs around the centre of satin titanium, set flush, and the trinity knots are cut through the gold itself. The pattern is therefore drawn in two metals: the gold surface, and where the knots are cut, the grey titanium beneath showing through. In the rose and yellow version two golds share the inlay, so the band carries both warm tones at once. In white gold the contrast is gentler, pale on grey, and the knots read more as engraving than as colour.

How it wears

The gold on this ring is solid, not plated and not gold coloured, so there is no surface layer to wear away. The titanium that carries it is light and can collect fine marks with daily wear; the satin finish and the cut knotwork both help those blend in. The inlay sits flush with the band, so the surface is smooth to the touch. Every metal in the ring is hypoallergenic.

Choosing yours

The choice that matters most is the gold. Rose and yellow together make the warmest, most visibly golden ring, and suit someone who wants the inlay to be noticed. White gold keeps the band in one cool tone, so the knots read as pattern rather than colour. Widths run from 4 to 10mm, the narrower end suiting a slimmer finger or a ring meant to read quietly. It pairs with itself, so a couple can each choose a different gold and still wear the same design.

Width by width

Each width this ring is made in
Width	How it reads	Weight, est.	Price
4mm	Slim, the quietest everyday width	1.5g	£675
5mm	Between slim and classic	1.8g	£675
6mm	Classic, the usual starting point for a band	2.2g	£675
7mm	Classic to broad, more of the pattern shows	2.5g	£675
8mm	Broad, a ring that is clearly there	2.9g	£700
9mm	Wide and bold, best on a larger hand	3.3g	£700
10mm	Wide and bold, best on a larger hand	3.6g	£700

Weights are estimates for a plain band of the same width in titanium at UK size N with a 1.6mm wall, from the model in our ring weight calculator. The price steps up at the widths that take more metal to make.

How it compares with the rings nearest it

This ring beside the closest rings in the range
Ring	What sets it apart	Metal	Widths	Surface hardness	From
Trinity knots, gold inlay (this ring)	Trinity knots cut through a solid gold inlay.	Titanium with gold inlay	4 to 10mm	Mohs 6	£675
Gold line, three diamonds	Three diamonds set into a solid gold line.	Titanium with gold inlay	4 to 10mm	Mohs 6	£695
Hammered black, gold line	Hand hammered black with a solid gold line.	Black zirconium with gold inlay	4 to 10mm	Mohs 8	£625
Rose on relieved black	Three tones: bright edges, black shoulders, rose gold centre.	Black zirconium with gold inlay	4 to 10mm	Mohs 8	£595

There are 18 titanium bands in the range, from £385 to £795. All about titanium.

The metal, in brief

Titanium is by a distance the lightest metal we make rings in. At about 4.5 g per cubic centimetre it is under a third the reference density of 18ct yellow gold. GETi says it normally uses Grade 2 for its designs and reserves higher-tensile Grade 5 for tension-set rings, so the exact grade belongs in the specification of the ring rather than a range-wide claim.

Surface hardness Mohs 6, density 4.5 g/cm³, and hypoallergenic, so it is a sound choice for skin that reacts to nickel. It is not a precious metal, so it carries no hallmark.

Compared side by side: Anodised zirconium or titanium, Black zirconium or titanium, Sterling silver or titanium. Or read the full titanium guide.

About Trinity knots, gold inlay

Can this ring be resized?: Limited enlargement may be possible. GETi says grade 5 titanium cannot be stretched or compressed: machining the inside larger removes metal and cannot reduce the size. Wall thickness, stones and inlays limit that option. Grade 2 titanium has different possibilities, so check the actual grade and design. A remake may be offered instead; confirm what happens to the original ring, engraving and finish before agreeing.
Is engraving included?: Yes, and it is optional. Leave the box blank and the ring is made plain. If you do want one it is laser cut inside the band where the ring is made, rather than sent out to a third party, and there is no charge and no extra wait.
How long will it take?: 2 to 3 weeks. It is made in your size after you order, not picked off a shelf, and that is the reason the widths and finishes are open choices.
Can I return it if I have it engraved?: Not for a change of mind. An engraving makes the ring clearly personalised, which puts it outside the statutory right to cancel, and it cannot be resold. Every ring shop draws the line here. Order it plain and you keep the full 30 days. Either way, a ring that arrives faulty or is not what you ordered is covered by the Consumer Rights Act, which nothing waives.
How much does the Trinity knots, gold inlay ring weigh?: About 1.5g at 4mm, 2.2g at 6mm, 3.6g at 10mm, estimated for a plain band in titanium at UK size N. Larger sizes and wider bands weigh more. It is a light ring by any standard: 18ct gold of the same size is more than twice the weight.
What widths does it come in, and do they cost the same?: 4 to 10mm. 4mm, 5mm, 6mm, 7mm are £675, and 8mm, 9mm, 10mm £700, because the wider bands take more metal to make.
What is closest to the Trinity knots, gold inlay in the range?: Gold line, three diamonds (titanium with gold inlay) and Hammered black, gold line (black zirconium with gold inlay). The comparison table on this page sets them side by side on metal, width, hardness and price.
What if I get the size wrong?: If it is unengraved, return it inside 30 days and we refund it, and we pay the postage. Use the free ring size finder first if you are unsure, and if the ring is a surprise, ask us and we will talk you through the ways to find out without asking them.