Wedding rings
Wedding rings made to order in Britain
Every band here is made in your size, in the width and finish you choose, with engraving inside at no charge. Every band arrives in two to three weeks.
99 rings · made to order in your size
Anodised channel
A band of real colour, set between natural metal edges.
Relieved black
Black cut back to bright metal along both edges.
Plain titanium
The lightest ring we make, and the simplest.
Wood inlay
Real wood, set into a titanium channel.
Slim band
Two millimetres of solid gold, narrow enough to sit close to an engagement ring.
Soft ridge
The face rises to a gentle ridge, so the light runs along the finger.
Rounded court
Rounded outside and rounded inside, which is the comfortable one.
Scrollwork
A scrolling beaded motif down the centre, fine bead texture at each edge.
Wide court
Six millimetres, high polished, domed outside and court inside.
Cross weave
A woven lattice of diamond cut squares across the full face.
Greek key, gold
A Greek key border cut in a continuous line around the band.
Sparkle line
Polished gold rails either side of a broad sparkling white centre.
Hammered gold
Hammered all over, so there is no mirror panel to keep perfect.
Milgrain edge
A fine beaded rope along both edges, polished in between.
Ripple
A rippled bark texture running the whole way across the face.
Two tone faceted
Sharp diamond cut facets in yellow, with a satin white gold edge.
Minimal edge, hers
Flat vertical facets on both, and a fine beaded edge on hers. 4mm, sold alone or as a set.
Minimal edge, his
Flat vertical facets on both, and a fine beaded edge on hers. 4mm, sold alone or as a set.
Contrast texture, hers
White against yellow: polished on his, a frosted sparkle on hers. 4mm, sold alone or as a set.
Contrast texture, his
White against yellow: polished on his, a frosted sparkle on hers. 4mm, sold alone or as a set.
Linear contrast, hers
Bars of white and yellow running across the face of both. 3.5mm, sold alone or as a set.
Linear contrast, his
Bars of white and yellow running across the face of both. 3.5mm, sold alone or as a set.
Square facet, hers
A row of square facets, cut the same on both rings. 4mm, sold alone or as a set.
Square facet, his
A row of square facets, cut the same on both rings. 4mm, sold alone or as a set.
Linear ribbed, hers
Fine ribbing in white against yellow, on a 5mm band. 5mm, sold alone or as a set.
Linear ribbed, his
Fine ribbing in white against yellow, on a 5mm band. 5mm, sold alone or as a set.
Mosaic, hers
Small polished and textured blocks worked around the band. 6mm, sold alone or as a set.
Mosaic, his
Small polished and textured blocks worked around the band. 6mm, sold alone or as a set.
Satin granulated, hers
A brushed satin band beside a granulated one. 6mm, sold alone or as a set.
Satin granulated, his
A brushed satin band beside a granulated one. 6mm, sold alone or as a set.
Horizontal textured, hers
Deep textured cuts across a wide 7mm band, polished between. 7mm, sold alone or as a set.
Horizontal textured, his
Deep textured cuts across a wide 7mm band, polished between. 7mm, sold alone or as a set.
Rose satin sparkle, hers
Rose gold, satin on his and a frosted sparkle on hers. 3mm, sold alone or as a set.
Rose satin sparkle, his
Rose gold, satin on his and a frosted sparkle on hers. 3mm, sold alone or as a set.
Faceted vega, hers
Broad flat facets that turn a round band into a soft polygon. 3mm, sold alone or as a set.
Faceted vega, his
Broad flat facets that turn a round band into a soft polygon. 3mm, sold alone or as a set.
Plain black zirconium
Black all the way round, and none of it is a coating.
Anodised bevels
Colour on the edges instead of down the middle.
Colour line on black
One narrow line of real colour through matte black.
Twin groove
Two tones divided by a V cut around the centre.
Brushed centre, polished bevels
Matte through the middle, bright along both edges.
Stepped two tone
A machined step, black on one level and bright on the other.
Gold line, titanium
Solid gold inlaid down the centre of brushed titanium.
Rose line, titanium
Solid 9ct rose gold down the centre of brushed titanium.
Gold line, black
Solid yellow gold set flush into satin black zirconium.
Rose on relieved black
Three tones: bright edges, black shoulders, rose gold centre.
Three tone
Bright edges, black shoulders, a gold line down the middle.
Hammered black
Struck by hand, so the facets never land twice the same way.
Faceted, titanium
Cut into ten flat planes rather than a curve.
Faceted, anodised
Cut into facets, then coloured, so each plane catches differently.
Hammered, anodised
Struck by hand, then given colour.
Celtic
A continuous knot, cut rather than printed.
Roman numeral
Your date, cut around the whole band in numerals.
Fingerprint
Their actual fingerprint, laser cut into the band.
Diamond set, titanium
One small diamond, flush set into brushed titanium.
Scattered set
Diamonds flush set at irregular intervals, not in a line.
Runes, titanium
Norse runes cut around the band.
Ogham, titanium
Ancient Irish script, cut as lines across the band.
Aztec, titanium
A dense Aztec pattern cut around the whole band.
Koi, titanium
Koi carp swimming around the band, cut into titanium.
Wildflowers, diamond set
Flowers cut around the band, with one diamond set among them.
Trinity knots, gold inlay
Trinity knots cut through a solid gold inlay.
Twin gold lines, titanium
Two fine lines of solid gold, set into brushed titanium.
Rose gold line, offset
A rose gold line set off centre, with a groove beside it.
Three diamonds, titanium
Three diamonds in a row, flush set in polished titanium.
Gold line, three diamonds
Three diamonds set into a solid gold line.
Hammered titanium, diamond set
Hand hammered titanium with one flush set diamond.
One diamond, black
A single ten point diamond, flush set into black.
Three diamonds, black
Three diamonds along a bright line through black.
Hammered black, gold line
Hand hammered black with a solid gold line.
Tyre tread, black
A tyre tread, cut around a black zirconium band.
Claddagh, black
The claddagh, hands, heart and crown, cut into black.
Celtic, black
A continuous Celtic knot, cut into black zirconium.
Twin lines, black
Two bright lines through matte black.
Waves, relieved black
Waves cut through black to bright metal.
Knurled, black
A knurled centre, like the grip of a tool, between bright edges.
Celtic, anodised
Celtic knotwork, cut into the band and then coloured.
Greek key, anodised
The Greek key meander, cut around the band and anodised.
Infinity, anodised
Looping infinity lines in colour around a bright band.
Wave, anodised
A single wave in colour, cut into a satin band.
Twin grooves, anodised
Two fine grooves of colour around a polished band.
Ovals, anodised
A row of coloured ovals around a bright band.
Segments, anodised
Wide segments of colour, divided by bars of bright metal.
Three grooves, anodised
Three fine lines of colour across a satin band.
Single groove, anodised
One fine groove of colour around a polished band.
Platinum line, titanium
A line of solid platinum set into brushed titanium.
Rose and yellow gold inlay
Two golds side by side in one wide inlay.
Wide gold inlay, titanium
Three millimetres of solid gold down the centre.
Hammered gold inlay, titanium
A wide gold inlay, hammered by hand.
Twin platinum lines, titanium
Two fine lines of platinum, set into titanium.
Celtic, gold lines
Celtic knotwork between two solid gold lines, on a broad band.
White and rose gold lines
One white gold line and one rose, side by side.
Dashed white gold line, titanium
A white gold line, broken into dashes.
Hammered titanium
Hand hammered titanium, nothing else.
Crossing lines, titanium
Curved lines cross and recross around the band.
Ribbed, titanium
Fine grooves the whole way round.
Twin lines, titanium
Two polished lines across satin titanium.
Chevrons, titanium
A run of chevrons cut into the band.
Morse code, titanium
Your words in Morse code, cut into titanium.
At a glance
Wedding rings made to order in Britain, metal by metal
99 bands in 6 metals. The least expensive is the plain titanium at £165. The widest go to 10mm. 27 cost under £300, 54 cost under £500.
| Metal | Rings | Price | Widths | Surface | 6mm band, est. |
|---|---|---|---|---|---|
| Titanium | 19 | £165 to £595 | 4 to 10mm | Mohs 6 | 2.2g |
| Black zirconium | 17 | £199 to £625 | 4 to 10mm | Mohs 8 | 3.2g |
| Anodised zirconium | 13 | £269 to £365 | 4 to 10mm | Mohs 8.5 | 3.2g |
| Titanium with a precious inlay | 14 | £385 to £795 | 4 to 10mm | Mohs 6 | 2.2g |
| 9ct gold | 32 | £515 to £719 | 2 to 7mm | Mohs 3.5 | Stated per ring |
| Black zirconium with a precious inlay | 4 | £575 to £625 | 4 to 10mm | Mohs 8 | 3.2g |
Prices include UK delivery and engraving. Weights are estimates for a plain 6mm band at UK size N with a 1.6mm wall (how they are worked out); the solid gold bands carry the maker's own weight on each ring's page. Surface hardness is on the Mohs scale, where a higher number resists fine scratches better.
Most wedding ring shops sort by metal and start with gold. We start with what the ring has to survive: a hand that types, lifts, gardens, washes up and knocks door frames for fifty years. Titanium is a third the weight of gold. Black zirconium has a hard, heat-grown oxide surface rather than applied black plating. Anodised zirconium grows colour at the surface under electrical current. Solid gold inlaid into either gives you hallmarked precious metal on the face of a contemporary band.
Every ring is made after you order it, in your size, and most of it in the Birmingham Jewellery Quarter. That is why the hard metal bands run from 4mm to 10mm with the finishes open, and it is why it takes a fortnight or so rather than a day. The solid gold bands are made one width at a time, from 2mm to 7mm. If you are buying two, most designs pair with a slimmer or wider partner on the His and Hers page.
Work it out before you order
About wedding rings
- How long does a wedding ring take to make?
- Two to three weeks for anything made to order in zirconium or titanium. Delivery is insured and signed for and adds one working day.
- Can I get matching wedding rings?
- Yes. Most designs come in widths from 4mm to 10mm, so a pair is the same ring in two widths. Where a design is made only in wide widths, its page names the slimmer partner it was drawn to sit beside, and ordering both together saves five per cent.
- Is engraving free on every wedding ring?
- Yes, inside the band, up to thirty characters, laser cut where the ring is made. An engraved ring cannot be returned for a change of mind, which is why the size finder sits in front of the range.