Can this ring be resized?

Limited enlargement may be possible. GETi says grade 5 titanium cannot be stretched or compressed: machining the inside larger removes metal and cannot reduce the size. Wall thickness, stones and inlays limit that option. Grade 2 titanium has different possibilities, so check the actual grade and design. A remake may be offered instead; confirm what happens to the original ring, engraving and finish before agreeing.

Is engraving included?

Yes, and it is optional. Leave the box blank and the ring is made plain. If you do want one it is laser cut inside the band where the ring is made, rather than sent out to a third party, and there is no charge and no extra wait.

How long will it take?

2 to 3 weeks. It is made in your size after you order, not picked off a shelf, and that is the reason the widths and finishes are open choices.

Can I return it if I have it engraved?

Not for a change of mind. An engraving makes the ring clearly personalised, which puts it outside the statutory right to cancel, and it cannot be resold. Every ring shop draws the line here. Order it plain and you keep the full 30 days. Either way, a ring that arrives faulty or is not what you ordered is covered by the Consumer Rights Act, which nothing waives.

How much does the Rose and yellow gold inlay ring weigh?

About 1.5g at 4mm, 2.2g at 6mm, 3.6g at 10mm, estimated for a plain band in titanium at UK size N. Larger sizes and wider bands weigh more. It is a light ring by any standard: 18ct gold of the same size is more than twice the weight.

What widths does it come in, and do they cost the same?

4 to 10mm. 4mm, 5mm, 6mm, 7mm are £575, and 8mm, 9mm, 10mm £600, because the wider bands take more metal to make.

What is closest to the Rose and yellow gold inlay in the range?

Gold line, black (black zirconium with gold inlay) and Rose on relieved black (black zirconium with gold inlay). The comparison table on this page sets them side by side on metal, width, hardness and price.

What if I get the size wrong?

If it is unengraved, return it inside 30 days and we refund it, and we pay the postage. Use the free ring size finder first if you are unsure, and if the ring is a surprise, ask us and we will talk you through the ways to find out without asking them.

Multi toned · Titanium with solid gold inlay

Rose and yellow gold inlay

From £575

Two golds side by side in one wide inlay.

A 3mm inlay of solid 9ct gold, half rose and half yellow, set flush into a titanium band so the two colours sit edge to edge. White and rose in the other version. Hallmarked at Birmingham, and the widest gold we set.

Made to order · 2 to 3 weeks · posted insured

Before you order, in one place

What you are buying: Rose and yellow gold inlay, precious inlay, made to order in your size. Widths 4 to 10mm.
Price: £575 total. UK delivery and engraving are included and nothing is added at checkout.
When it arrives: 2 to 3 weeks to make, then one working day insured and signed for. Delivery in full
Changing your mind: 30 days from delivery, return postage paid, unless you have it engraved. The cancellation right
Who you are contracting with: Trothe Ltd, registered in England and Wales, company number 17431230, Lytchett House, 13 Freeland Park, Wareham Road, Poole, Dorset, BH16 6FA. Questions and complaints to hello@trothe.co.uk.

MaterialTitanium with solid gold inlay
InlaySolid 9ct gold, flush set
Surface wearGrade and finish dependent; not scratch proof
Density4.5 g/cm³ base metal
ResizableDepends on base
HallmarkedYes, Birmingham Assay Office
MadeTo order, in your size
Delivery2 to 3 weeks, insured
Returns30 days, unengraved
EngravingOptional, included, inside the band

Also in: Wedding rings, His and hers, Men's rings, Women's rings

About this ring

Rose and yellow gold inlay, in detail

A single 3mm inlay of solid 9ct gold, divided along its length so rose sits against yellow, is set flush into a satin titanium band. The join between the two golds is the design: a warm pink and a brighter yellow meeting edge to edge, framed by grey titanium on either side. The second version exchanges yellow for white gold, which cools the ring and lets the rose stand out more strongly. No ring in the range sets a wider band of gold, and this one shows plainly that it is made of more than one precious metal.

How it wears

Beneath the gold the band is titanium, so a broad strip of precious metal does not make the ring heavy; it stays light enough to forget about. The titanium can pick up fine marks, and its satin finish softens how they look. The gold lies flush, with no step at either edge to catch on knitwear. The ring is hypoallergenic, which matters for skin that reacts to nickel. Rough, abrasive work is the one setting where it is better kept off the hand.

Choosing yours

There are two decisions: which pair of golds, and how much titanium around them. Rose and yellow is warm from edge to edge; white and rose is cooler, with the rose as its only warm note. On a 4 or 5mm band the 3mm inlay fills most of the face and the ring reads as gold; at 8 to 10mm grey titanium frames it and the gold becomes a centre panel. It suits someone whose jewellery already mixes metals, and it sits well beside a partner wearing a single gold, such as Gold line, titanium or Rose line, titanium.

Width by width

Each width this ring is made in
Width	How it reads	Weight, est.	Price
4mm	Slim, the quietest everyday width	1.5g	£575
5mm	Between slim and classic	1.8g	£575
6mm	Classic, the usual starting point for a band	2.2g	£575
7mm	Classic to broad, more of the pattern shows	2.5g	£575
8mm	Broad, a ring that is clearly there	2.9g	£600
9mm	Wide and bold, best on a larger hand	3.3g	£600
10mm	Wide and bold, best on a larger hand	3.6g	£600

Weights are estimates for a plain band of the same width in titanium at UK size N with a 1.6mm wall, from the model in our ring weight calculator. The price steps up at the widths that take more metal to make.

How it compares with the rings nearest it

This ring beside the closest rings in the range
Ring	What sets it apart	Metal	Widths	Surface hardness	From
Rose and yellow gold inlay (this ring)	Two golds side by side in one wide inlay.	Titanium with gold inlay	4 to 10mm	Mohs 6	£575
Gold line, black	Solid yellow gold set flush into satin black zirconium.	Black zirconium with gold inlay	4 to 10mm	Mohs 8	£575
Rose on relieved black	Three tones: bright edges, black shoulders, rose gold centre.	Black zirconium with gold inlay	4 to 10mm	Mohs 8	£595
Three tone	Bright edges, black shoulders, a gold line down the middle.	Black zirconium with gold inlay	4 to 10mm	Mohs 8	£595

There are 18 titanium bands in the range, from £385 to £795. All about titanium.

The metal, in brief

Titanium is by a distance the lightest metal we make rings in. At about 4.5 g per cubic centimetre it is under a third the reference density of 18ct yellow gold. GETi says it normally uses Grade 2 for its designs and reserves higher-tensile Grade 5 for tension-set rings, so the exact grade belongs in the specification of the ring rather than a range-wide claim.

Surface hardness Mohs 6, density 4.5 g/cm³, and hypoallergenic, so it is a sound choice for skin that reacts to nickel. It is not a precious metal, so it carries no hallmark.

Compared side by side: Anodised zirconium or titanium, Black zirconium or titanium, Sterling silver or titanium. Or read the full titanium guide.

About Rose and yellow gold inlay

Can this ring be resized?: Limited enlargement may be possible. GETi says grade 5 titanium cannot be stretched or compressed: machining the inside larger removes metal and cannot reduce the size. Wall thickness, stones and inlays limit that option. Grade 2 titanium has different possibilities, so check the actual grade and design. A remake may be offered instead; confirm what happens to the original ring, engraving and finish before agreeing.
Is engraving included?: Yes, and it is optional. Leave the box blank and the ring is made plain. If you do want one it is laser cut inside the band where the ring is made, rather than sent out to a third party, and there is no charge and no extra wait.
How long will it take?: 2 to 3 weeks. It is made in your size after you order, not picked off a shelf, and that is the reason the widths and finishes are open choices.
Can I return it if I have it engraved?: Not for a change of mind. An engraving makes the ring clearly personalised, which puts it outside the statutory right to cancel, and it cannot be resold. Every ring shop draws the line here. Order it plain and you keep the full 30 days. Either way, a ring that arrives faulty or is not what you ordered is covered by the Consumer Rights Act, which nothing waives.
How much does the Rose and yellow gold inlay ring weigh?: About 1.5g at 4mm, 2.2g at 6mm, 3.6g at 10mm, estimated for a plain band in titanium at UK size N. Larger sizes and wider bands weigh more. It is a light ring by any standard: 18ct gold of the same size is more than twice the weight.
What widths does it come in, and do they cost the same?: 4 to 10mm. 4mm, 5mm, 6mm, 7mm are £575, and 8mm, 9mm, 10mm £600, because the wider bands take more metal to make.
What is closest to the Rose and yellow gold inlay in the range?: Gold line, black (black zirconium with gold inlay) and Rose on relieved black (black zirconium with gold inlay). The comparison table on this page sets them side by side on metal, width, hardness and price.
What if I get the size wrong?: If it is unengraved, return it inside 30 days and we refund it, and we pay the postage. Use the free ring size finder first if you are unsure, and if the ring is a surprise, ask us and we will talk you through the ways to find out without asking them.